About The i-phi™

The i-phi™ is a Hydrogen Generating Module for diesel engines. The i-phi™ produces a mixture of hydrogen and oxygen gases, on demand, through a controlled electrolysis process using distilled water. These gases are delivered to the engine's air intake system through a simple ¼” port, where they are mixed with the incoming air stream. This process improves the overall engine combustion efficiency by producing a more complete and faster burn of the air-fuel mixture. The results are seen in significantly improved fuel economy, decreased emissions, and decreased engine maintenance.

This exhaustively tested and reliable design is safe to operate. The small amount of power needed for the i-phi™ operation is drawn from the vehicle’s electrical system, and only while the engine is running. The Hydrogen / Oxygen mixture is produced on demand at very low pressure and all of it is burned during operation, so there is no storage of any gas on board the vehicle.

Third-party validation* of benefits including:
- reduction in fuel consumption from 10 - 30%
- 80% reduction in hydrocarbon emissions
- Engines run cleaner, reducing clogged engine components and increasing oil change intervals

The i-phi™:
- Robust and designed for long life
- Two to four hours to install
- Only connections are to battery, alternator, and piping to the intake air system.
- There is no connection to the ECM or ECU.
- Requires no maintenance; only refilling with distilled water
- Only operator input or management is refilling water reservoir
- Money back guarantee if 10% fuel savings are not achieved
- Payback can be less than one year
- Installed price: $8,750 (USD)

*Third party validation:
Wardrop Engineering is an internationally recognized engineering consulting firm specializing in Aerospace and Nuclear industry sectors. On September 9, 2005, Wardrop Engineering validated "proof of concept" for the i-phi™.
Clean Air Technologies is a US based company from Buffalo, NY. They specialize in the manufacturing of EPA Certified portable emissions measuring systems (PEMS) and emissions testing consulting. They are facilitating ETV certification testing as a third party verification entity. Dave Miller, President of Clean Air, recently expressed "based on current testing, the i-phi™ system appears to be performing effectively at reducing fuel consumption and vehicle emissions."

*Cold weather kit available for extreme conditions.